EFFECT OF SOME FACTORS ON THE ELECTROLYSIC OF SODIUM PERCHLORATE FROM SODIUM CHLORATE USING PbO2/Pb-Ti ELECTRODE

Đang tải...
Hình ảnh thu nhỏ

Năm xuất bản

Nhan đề tạp chí

ISSN

Nhan đề tập

Nhà xuất bản

Tạp chí Nghiên cứu Khoa học và Công Nghệ Quân sự

DOI

Tóm tắt

The electrolysis process of sodium perchlorate production from sodium chlorate using PbO2/Pb-Ti electrode was studied by linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS) and electrolysis efficiency evaluation. The results showed that the technological parameters (sodium chlorate concentration, temperature, electrolyte current density, additive content and pH) strongly affected the polarization, charge transfer resistance and electrolysis efficiency. Therefore, the appropriate technological mode for the electrolysis process was selected as: NaClO3 concentration 300 - 600 g/L; temperature 50 oC; current density 0.15 - 0.2 A/cm2; NaF additive concentration 1-2 g/L; solution pH 7.

Mô tả

Từ khóa chủ đề

Trích dẫn

Bộ sưu tập

Endorsement

Review

Supplemented By

Referenced By